ALUMINUM

FILLER METAL 1100 is a 99% Aluminum wire that is highly resistant to chemical attack and weathering. It is recommended for welding 1100 and 3003 aluminum sheets, plates and shapes

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.05-0.20		0.15 max			0.05 max		0.0008 max	99.0 min.	0.10 max

 

FILLER METAL 2319 is widely used in high strength structural and aircraft applications where superior resistance to stress corrosion cracking and high elevated temperature properties are desired. The alloy is heat treatable and provides higher strength and better ductility than the 4XXX filler alloys when welding 2XXX alloys.

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
5.8 - 6.8	0.02Max	0.15Max		0.30 Max	0.20-0.40	0.20 Max	0.0008Max	Rem	0.10Max	0.10-0.20

 

  FILLER METAL 4043 is a 5% Silicon Aluminum filler metal recommended for welding 2014, 3003, 3004, 5052, 6061, and 6101 (in various conditions of heat treatment and 6063 sheets, plates and shapes).

• DATA SHEET
• MSDS

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.30 max	0.05 max	0.15 max		0.8 max	0.05 max	4.5 - 6.0	0.0008 max	Rem	0.10 max	0.20 max

FILLER METAL 4047 is a 12% Silicon Aluminum brazing rod that is recommended for torch brazing and dip or furnace brazing of 1060, 1350, 3003, 5005, 6061, 6063, and 7005.

• DATA SHEET

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.30 max	0.10 max	0.15 max		0.8 max	0.15 max	11.0-13.0	0.08 max	Rem	0.20 max

FILLER METAL 5183 is used in marine and structural applications where high strengths, high fracture toughness for impact resistance, and exposure to corrosive elements are important. It is used to weld 5083, 6061, 6063, 5086, 7005 and 7039 alloys.

• DATA SHEET

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.10 max	4.3 - 5.2	0.15 max	0.05-0.25	0.40 max	0.50-1.0	0.40 max	0.0008 max	Rem	0.25 max	0.15 max

FILLER METAL 5356 is a 5% Magnesium Aluminum that offers corrosion resistance when exposed to salt water. It is used to weld 5050, 5052, 5083, 5356, 5454, and 5456 base metal.

• DATA SHEET

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.10 max	4.5 - 5.5	0.15 max	0.05-0.20	0.40 max	0.05-0.20	0.25 max	0.0008 max	Rem	0.10 max	0.06-0.20

FILLER METAL 5554 is widely used in the manufacture of chemical storage tanks, automotive wheels, and in particular, those applications that may be subjected to temperatures in excess of 150°F. This combination of alloys does not become sensitive to stress corrosion cracking at elevated temperatures.

• DATA SHEET

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.10 Max	2.4 - 3.0	0.15Max	0.05-0.20	0.40 Max	0.50-1.0	0.25 Max	0.0008Max	Rem	0.25Max	0.05-0.20

FILLER METAL 5556 offers an excellent combination of corrosion resistance, strength, toughness, workability, and weldability. It is recommended for welding 5083, 5086 5154, 5254 and 5456 high tensile aluminum alloys.

• DATA SHEET

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.10 max	4.7 - 5.5	0.15 max	0.05-0.20	0.40 max	0.5 - 1.0	0.25 max	0.0008 max	Rem	0.25 max	0.05-0.20

UBZ1300 is an all position 5% silicon aluminum arc welding electrode with exclusive self lifting slag. It is used for low temperature production and maintenance welding of cast and wrought aluminum sheets, plates, castings and extrusions. It provides good color match and excellent corrosion resistance. Applications include tanks, pipes, appliances, refrigeration equipment, irrigation equipment, automobile parts and parts found in the chemical, food, and laundry industries.

Cu	Mg	Other	Cr	Fe	Mn	Si	Be	Al	Zn	Ti
0.30 max	0.05 max	0.15 max		0.08 max	0.05 max	4.5 - 6.0	0.0008 max	Rem	0.10 max	0.20 max