|
ER1100 BARE
|
FILLER METAL 1100 is a 99% Aluminum wire that is highly resistant to chemical attack and weathering. It is recommended for welding 1100 and 3003 aluminum sheets, plates and shapes
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.05-0.20 |
|
0.15 max |
|
|
0.05 max |
|
0.0008 max |
99.0 min. |
0.10 max |
|
- Specifications: AWS SFA A5.10
- Classification: ER1100
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
13-24 ksi |
| Yield Strength |
5-22 ksi |
| Elongation % |
3-35% |
|
|
ER1100 BARE |
|
ER2319 BARE
|
FILLER METAL 2319 is widely used in high strength structural and aircraft applications where superior resistance to stress corrosion cracking and high elevated temperature properties are desired. The alloy is heat treatable and provides higher strength and better ductility than the 4XXX filler alloys when welding 2XXX alloys.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 5.8 - 6.8 |
0.02Max |
0.15Max |
|
0.30 Max |
0.20-0.40 |
0.20 Max |
0.0008Max |
Rem |
0.10Max |
0.10-0.20 |
- Specifications: AWS SFA A5.10
- Classification: ER2319
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
35 ksi |
| Yield Strength |
26 ksi |
|
|
ER2319 BARE |
|
ER4043 BARE
|
FILLER METAL 4043 is a 5% Silicon Aluminum filler metal recommended for welding 2014, 3003, 3004, 5052, 6061, and 6101 (in various conditions of heat treatment and 6063 sheets, plates and shapes).
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.30 max |
0.05 max |
0.15 max |
|
0.8 max |
0.05 max |
4.5 - 6.0 |
0.0008 max |
Rem |
0.10 max |
0.20 max |
- Specifications: AWS SFA A5.10
- Classification: ER4043
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
20-34 ksi |
| Yield Strength |
10-28 ksi |
| Elongation % |
4-12% |
|
|
ER4043 BARE |
|
ER4047 BARE
|
FILLER METAL 4047 is a 12% Silicon Aluminum brazing rod that is recommended for torch brazing and dip or furnace brazing of 1060, 1350, 3003, 5005, 6061, 6063, and 7005.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.30 max |
0.10 max |
0.15 max |
|
0.8 max |
0.15 max |
11.0-13.0 |
0.08 max |
Rem |
0.20 max |
|
- Specifications: AWS SFA A5.10/A5.8
- Classification: ER4047/BA1Si-4
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
20-34 ksi |
| Yield Strength |
10-28 ksi |
| Elongation % |
4-12% |
|
|
ER4047 BARE |
|
ER5183 BARE
|
FILLER METAL 5183 is used in marine and structural applications where high strengths, high fracture toughness for impact resistance, and exposure to corrosive elements are important. It is used to weld 5083, 6061, 6063, 5086, 7005 and 7039 alloys.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.10 max |
4.3 - 5.2 |
0.15 max |
0.05-0.25 |
0.40 max |
0.50-1.0 |
0.40 max |
0.0008 max |
Rem |
0.25 max |
0.15 max |
- Specifications: AWS SFA A5.10
- Classification: ER5183
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
40-45 ksi |
| Yield Strength |
18-26 ksi |
| Elongation % |
12-16% |
|
|
ER5183 BARE |
|
ER5356 BARE
|
FILLER METAL 5356 is a 5% Magnesium Aluminum that offers corrosion resistance when exposed to salt water. It is used to weld 5050, 5052, 5083, 5356, 5454, and 5456 base metal.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.10 max |
4.5 - 5.5 |
0.15 max |
0.05-0.20 |
0.40 max |
0.05-0.20 |
0.25 max |
0.0008 max |
Rem |
0.10 max |
0.06-0.20 |
- Specifications: AWS SFA A5.10
- Classification: ER5356
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
27-46 ksi |
| Yield Strength |
12-30 ksi |
| Elongation % |
10-17% |
|
|
ER5356 BARE |
|
ER5554 BARE
|
FILLER METAL 5554 is widely used in the manufacture of chemical storage tanks, automotive wheels, and in particular, those applications that may be subjected to temperatures in excess of 150°F. This combination of alloys does not become sensitive to stress corrosion cracking at elevated temperatures.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.10 Max |
2.4 - 3.0 |
0.15Max |
0.05-0.20 |
0.40 Max |
0.50-1.0 |
0.25 Max |
0.0008Max |
Rem |
0.25Max |
0.05-0.20 |
- Specifications: AWS SFA A5.10
- Classification: ER5554
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
35 ksi |
| Yield Strength |
16 ksi |
| Elongation % |
17.0% |
|
|
ER5554 BARE |
|
ER5556 BARE
|
FILLER METAL 5556 offers an excellent combination of corrosion resistance, strength, toughness, workability, and weldability. It is recommended for welding 5083, 5086 5154, 5254 and 5456 high tensile aluminum alloys.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.10 max |
4.7 - 5.5 |
0.15 max |
0.05-0.20 |
0.40 max |
0.5 - 1.0 |
0.25 max |
0.0008 max |
Rem |
0.25 max |
0.05-0.20 |
- Specifications: AWS SFA A5.10
- Classification: ER5556
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
|
| Yield Strength |
|
| Elongation % |
|
|
|
ER5556 BARE |
|
UNIBRAZE 1300
|
UBZ1300 is an all position 5% silicon aluminum arc welding electrode with exclusive self lifting slag. It is used for low temperature production and maintenance welding of cast and wrought aluminum sheets, plates, castings and extrusions. It provides good color match and excellent corrosion resistance. Applications include tanks, pipes, appliances, refrigeration equipment, irrigation equipment, automobile parts and parts found in the chemical, food, and laundry industries.
| Cu |
Mg |
Other |
Cr |
Fe |
Mn |
Si |
Be |
Al |
Zn |
Ti |
| 0.30 max |
0.05 max |
0.15 max |
|
0.08 max |
0.05 max |
4.5 - 6.0 |
0.0008 max |
Rem |
0.10 max |
0.20 max |
| TYPICAL DEPOSIT CHARACTERISTICS |
| Tensile Strength |
34000 psi |
| Yield Strength |
20000 psi |
| Elongation % |
18.00% |
| Impact Resistance |
Fair |
| Corrosion Resistance |
Good |
| Hardness |
HRC 48 - 56 |
| Hot Hardness |
Very Good |
|
|
UNIBRAZE 1300 |
